Filltite Masonry-Repair Filler Grey - 1.5KG
Masonry-Repair Filler Grey 1.5KG
Shrink-free powdered filler with high adhesion that can be used for a wide range of repairs inside or outside.
Product Description
-
A fine cement based powdered filler that contains sand, resins and special additives to produce a grey paste when mixed with water.
-
Excellent adhesion to most substrates and the ability to apply straight onto damp surfaces makes it ideal for work on exterior surfaces.
-
Use it to fill holes and cracks, pointing work, repairs to degraded concrete, cornices, rough-casting, building blocks and window reveals.
-
Once dry to finish, it can be covered with any type of paint, plaster-based or ready mixed fillers.
-
Created in Great Britain and manufactured in France.
Key Features
-
Easy to mix with water.
-
Use inside or outside.
-
Can be applied to damp surfaces.
-
Excellent adhesion qualities to most substrates.
-
Will not shrink.
-
Crack resistant.
-
Can be painted when dry.
-
Will accept plaster based or ready to use fillers.
Technical Characteristics
-
Grain Size: Fine
-
Mixing: Approx. 300ml of water for each 1 kg of powder
-
Application Depth: Up to 2 cm in one application
-
Consumption: Approx. 1.3 kg per m² per 1mm depth
-
Adhesion: Complies with standard DTU 42.1
-
pH: Alkaline
-
Setting Starts: After 40 minutes
-
Setting Ends: In 1hr 30 minutes
-
Drying Time: Approx. 12 hours per 1cm depth
Application Tip
To increase the standard application thickness add approximately 20% sand (with a particle size 0-2mm) to the mix
Precautions
This product is labelled as hazardous and contains cement. Gloves should be worn during use. Refer to the safety section on the packaging before use.
Limitations
The ambient temperature during application and drying must be between +5á´¼C and +35á´¼C. Open working time as well as drying time can be affected by ambient temperature.
Do not apply to plaster or old paintwork and do not use the paste once it has started to set.
